Embroidered Table Runner
Butcher
illustrations in an 1897 cookbook inspired librarian Jessica Pigza to make this
topper, featured in BiblioCraft ($27.50;
STC Craft). To follow her lead, you'll need two 12"W x 73"L pieces of
beige linen and two sets of the cow, sheep, and pig templates fromcountryliving.com/animalrunner.
Step 1: Wash, dry, and iron both
pieces of linen; set one aside. Place the other piece on a flat surface, right
side down. Beginning eight inches from the left end and working toward the
center, place one set of cow, sheep, and pig templates right side down, atop
the linen, spacing them 2½ inches apart. Secure the templates with double-sided
tape. Create the mirror image on the opposite end with the remaining templates.
Then, flip the linen piece right side up.
Step 2: Use masking tape to
temporarily affix the linen piece, templates side down, against a sunny
window—the light shining through will illuminate the designs. Trace each design
onto the front side of the linen using an erasable fabric marker (Marvy
Uchida, $3.49; joann.com). When finished,
detach from the window; remove all templates and tape.
Step 3: Using an embroidery hoop
and blue embroidery floss, backstitch along the solid lines of the designs, and
use a running stitch for the dotted lines (see instructions atcountryliving.com/embroiderytutorial).
Erase any stray marks.
Step 4: Place the linen pieces
together, right sides facing, and pin around all four edges. Machine-stitch
along the edges, leaving a ½-inch seam allowance and an eight-inch opening at
the center of the bottom seam. Trim the corners. Turn the runner right side
out, and hand-stitch the opening closed. Place the runner facedown and iron the
seams flat.
Step 5: With red embroidery thread,
hand-sew a line of running stitches ½ inch from all four edges of the runner.
0 comments:
Post a Comment